Home Valves Cartridges Contact Us
	Microflate	The Microflate uses twist-to-control technology: Thread a 3/8-24 cartridge into the Microflate, and then tighten until the cartridge is pierced. To release the gas, unthread the cartridge approximately ½ to 1 turn. Gas is released in controlled fashion by threading and unthreading the cartridge to adjust flow or shut off the valve. Available Options include custom colors and outlets.
	Part Number	2351
	Specifications
	Valve Type	Twist
	Actuation	Twist-to-Control
	Input	3/8-24 Threaded Cartridges
	Output	Stock Outlet - 5/16–32 thread for Schrader valves
		Stock Outlet – Oring Seal for Presta Valves - Pushed-on
	Mass	1.38oz / 39.12 grams (w/o cartridge)
	Dimensions	1.27” x 0.70” x .1.74” / 32.35mm x 17.63mm x 44.20mm
	Gas Compatibility	CO2, O2, N2O, Argon, N2, Propane, 134A
	Construction	High strength glass reinforced nylon, various o-ring polymers, steel and brass components.
	Recommended Temperature	Min		32F/ 0C	Max		120F/ 49C
	Rated Temperature	Min		0F/ -18C	Max		120F/ 49C
	Flow Rate (CO2)	Min		.5 L/Min	Max		30 L/Min
	Torque to Puncture Cartridge	Device			Torque
		3/8-24 Thread w/ 12g CO2			3 to 5 ft-lbs/.41 to .70 kg-m
	Rotations to Puncture	Device			Number/Degrees
		3/8-24 Thread 12 or 16g CO2			3.5 turns
	Force of Actuation	3-5 Lbs/1.36-2.25 Kg
	Gas Permeation (Valve with Punctured Cartridge)	Gas			Grams/Day
		CO2			.05 g
	Lifespan	5 yrs
	Shelf Life	Approx 10 yrs
	Quality	100% Function and Flow Test
	Country of Origin	USA
Click to see Options	Available Options	Available in several colors
		Stock head accepts 3/8-24 threaded cartridges and aerosol cans
		Additional Custom outlets available
		Custom pad printed logos, custom round labels on back
	Revision	20080516
	Contact Information	Genuine Innovations 2700 East Bilby Road, Tucson, AZ 85706, USA (800) 340-1050 | (520) 295-3936 | (520) 295-3938 FAX www.co2pros.com| info@co2pros.com| Contact Us
	Copyright © 2008 Genuine Innovations. All Rights Reserved.					Back to Stock Valves